Building a Two-Kite Quiver: Which Wind Ranges Each Kiteboarding Kite Size Covers
Once you can ride independently, the next question is which kites to own. Most riders start with two sizes and add a third later. The aim is simple: two kites whose wind ranges overlap, so that on any rideable day one of them fits. This guide uses the Kite Size Calculator to work out which winds each size covers for three rider weights, then shows how to choose a pair. It assumes you have had lessons and know your safety systems; it is not a guide for a first kite.
How we worked out the ranges
For each wind speed from 8 to 30 knots, we ran the calculator on freeride settings and checked whether a given kite size fell inside its suggested range (20% either side of the recommendation). The wind speeds where it did are that kite's working range for that rider. Two limits apply. The method knows nothing about a particular kite's design, so the manufacturer's printed wind range always overrides it. And the calculator gives no size at all from 28 knots (Beaufort force 7), so no range below runs past 27 knots.
The ranges
65 kg rider
- 7 m²: 19 to 27 knots
- 9 m²: 15 to 21 knots
- 10 m²: 13 to 19 knots
- 12 m²: 11 to 16 knots
- 14 m²: 10 to 13 knots
- 17 m²: 8 to 11 knots
75 kg rider
- 7 m²: 22 to 27 knots
- 9 m²: 17 to 25 knots
- 10 m²: 15 to 22 knots
- 12 m²: 13 to 18 knots
- 14 m²: 11 to 16 knots
- 17 m²: 9 to 13 knots
90 kg rider
- 9 m²: 20 to 27 knots
- 10 m²: 18 to 27 knots
- 12 m²: 15 to 22 knots
- 14 m²: 13 to 19 knots
- 17 m²: 11 to 15 knots
Choosing a pair without a gap
Pick two sizes whose ranges overlap by a few knots. The overlap is your margin for gusts and for a kite that turns out to be a little more or less powerful than the formula assumes.
- 75 kg rider: a 9 and a 12 cover 13 to 25 knots with an overlap at 17 to 18 knots. A 10 and a 14 cover 11 to 22 knots with an overlap at 15 to 16. The first pair suits a windy coast; the second suits a spot with lighter average wind.
- 65 kg rider: a 7 and a 10 cover 13 to 27 knots, overlapping at 19 knots. A 9 and a 12 cover 11 to 21 knots, overlapping at 15 to 16.
- 90 kg rider: a 10 and a 14 cover 13 to 27 knots, overlapping at 18 to 19. A 12 and a 17 cover 11 to 22 knots, overlapping at 15.
Notice the pattern: a ratio of about 1.3 to 1.4 between the two sizes gives a small overlap. Wider gaps (a 7 and a 12 for a 75 kg rider) leave winds where neither kite fits: on the calculator's ranges, 19 to 21 knots for that pair.
Start from your local wind
A quiver should fit the wind you actually get. Look at a season of observations for your spot, convert them to knots with the Wind Speed Converter if they come in mph or km/h, and note where most rideable days fall. Then choose the pair whose combined range is centred on that band. If most days are 14 to 20 knots, a 75 kg rider might choose a 10 and a 12 or 13 rather than a 9 and a 12.
Lean small in gusty places
The ranges above are for steady wind. In gusty conditions, judge the kite by the gust, not the average. A 75 kg rider facing "15 gusting 22" is at the bottom of the 10 m² range in the lulls and at its top in the gusts; the 12 m² would be overpowered in every gust (its range ends at 18 knots). Pull rises with the square of wind speed, so the gust is what lofts and drags riders. Our guide to gusts versus average wind shows the numbers, and our Beaufort Scale Guide marks where strong wind becomes too strong.
What else shifts the ranges
- Kite type. High-aspect freeride and race kites have more low-end power than wave or freestyle kites of the same size.
- Board. A larger board, or a hydrofoil, lets you ride a smaller kite in lighter wind, which extends the bottom of your quiver more cheaply than a huge kite.
- Riding style. Freestyle riders typically go about 10% smaller (the calculator's freestyle factor is 0.9); light-wind riders about 15% larger.
- Skill and conditions. Waves, chop, cold dense air and crowded water all argue for the smaller kite.
A worked example
Sam weighs 75 kg and rides a twin-tip at a beach where the season's rideable days mostly fall between 14 and 22 knots. On the ranges above, a 10 m² kite covers 15 to 22 knots on its own, which already spans most of Sam's days. Adding a 14 m² kite (11 to 16 knots) extends the bottom of the range and overlaps the 10 at 15 to 16 knots. A 9 and 12 pair would also work but would spend more of its range in winds Sam rarely rides. Sam checks the manufacturer's ranges for both models, finds they agree within a knot or two, and buys the 10 and the 14.
When to add a third kite
A third kite is usually either a big light-wind kite or a small high-wind kite. Add it only if your log shows many days outside the pair's combined range. For a 75 kg rider on a 9 and a 12, light days under 13 knots are the usual gap; many riders cover that with a foil board rather than a 17 m² kite.
Safety comes before coverage
No quiver makes every day rideable, and the point of a small kite is not to ride in a gale. If your smallest kite would be above its maker's range in the gusts, or the wind is force 7 or more, do not go out. Ride with a working quick release, a leash, a helmet and an impact vest, keep a clear zone downwind, and launch at the edge of the window. Our traction kite safety guide covers each of these.
Summary
- Find the wind band where most of your rideable days fall, in knots.
- Use the calculator's ranges to choose two sizes about 1.3 to 1.4 times apart that overlap in the middle of that band.
- Check each kite's manufacturer range; it wins.
- In gusty spots, size for the gust and lean smaller.